HOW TO FLASH ANDROID 5.0.2 STOCK ROM FOR SAMSUNG GALAXY GRAND PRIME DUOS SM-G530H


HOW TO FLASH ANDROID 5.0.2 STOCK ROM FOR SAMSUNG GALAXY GRAND PRIME DUOS SM-G530H

 

Alright today I am going to show you how to flash Samsung Galaxy Grand Prime with latest Android version 5.0.2 or greater version. So let’s start 1st of all I am going to show you the early requirements which are essentially part of flashing Samsung Galaxy Grand Prime.
PRE-REQUISITES FOR INSTALLING ROM
Before installing ROM makes sure that all things are in place,
§ Make sure that device is charged up to 80%.

§ You have a laptop or PC with Samsung Galaxy Grand latest USB drivers. And install them in your Laptop or PC
§ Backup of your data is very important.
§ Make sure you have download a correct Rom for your mobile. And extract the ROM file in your Laptop or PC. You can download ROM from HERE
§ Download Flashing Tool for flashing you Device ( I recommended you Latest Version of Odin)
When all of these things which are mention above are in place then Get ready for flashing…

HOW TO FLASH ANDROID 5.0.2 STOCK ROM FOR SAMSUNG GALAXY GRAND PRIME DUOS SM-G530H

FOLLOW THE STEP BY STEP GUIDE:
1: Open your mobile and go into settings. In the setting tape on the developer option. Then check on the USB debugging option. If USB debugging is already checked then well and good.
2: Make sure your device in charge up to 80% or more.
3: Turn off your device.
4: Then press Volume Down (-) + Home button + Power button at same time. When you do this you may able to saw downloading mode Opens.
5: Now Download mode opens then press volume up (+) button. Downloads mode looks like image below.






6: Now Open the Odin whatever version you have downloaded. Open the Odin as administrator.
7: Now attach you device with PC or Laptop on which you already open Odin. On successful connection you will see ID: COM will turn blue as shown in image below.




8: Now make sure auto reboots and F restart time is checked then Click on PDA or AP and find the file which you already download and extract in our system. You must have to select .tar extension file.
9: Then click on Start button and Relax for few minutes. After completion you might show PASS message in Green box.




 That’s it you have done it without any consumption of cost.
Note: IF THERE ARE SOME ERROR OCCURS WHILE DOING ALL THESE PROCESS THEN YOU HAVE TO MAKE SURE THE LATEST SAMSUNG USB DRIVERS ARE INSTALL IN YOUR SYSTEM.AND MAKE THE FLASHING FILE THAT YOU ARE DOWNLOADED ARE NOT CORRUPT.

Finally Do it on your own risk and if you have any Question About this topic then you can comment me in comment box. then I will try sort out your problem.




















Previous
Next Post »